It’s not surprising that many people ask how to install a basement bathroom, or any other type of bathroom for that matter. When most people think of installing a basement bathroom they usually picture an old cast-iron drainpipe with a shower head and toilet on it. Although a basement bathroom can be rather retro and you may have already replaced your old bathroom fixtures, it may not be too difficult to replace the plumbing and drain pipes. Actually, it is pretty easy to do so if you have some basic tools like a hacksaw, a putter, a pipe wrench and pliers. You just need to be careful not to cut the old drainpipe because you don’t want to cause further damage to the walls and flooring of your basement bathroom.
How to Install a Basement Bathroom
Probably the easiest way to install this type of room in your house is using plumbing and hardware you probably already have at home. For example, there is an old sewer connection that connects your old bathtub to the sewer line. You simply need to detach the old pipe and cut it and the new one to fit. If you are using plumbing pipes, simply disconnect them, lift them up, and reassemble them. Remember that it may be necessary to use some kind of power to remove the drains.
Some other things you need to think about when learning how to install a basement bathroom include making sure that your walls are in good condition.
This is crucial because your new bathroom will be sitting on the water. The pipes that you are going to use will probably leak, and you don’t want that to happen. The first thing you’ll need to do is get some plastic sheeting and put down at least three foot thick cardboard on all sides of the walls. This will help prevent the moisture from entering your basement bathroom. After putting the plastic on the walls, you need to get some wood glue and put down the trim around the perimeter of the walls.
Once the walls are in place, you need to begin looking at your bathroom cabinet plans.
If you are building your bathroom cabinet yourself, you’ll need to make sure that your floor and wall are level. You can then measure out where you want your walls to be and take those measurements to your local home improvement store.
When looking at bathroom cabinet plans for a basement, it is important to get rid of any existing cabinets.
These items will only weigh you down. The best way to accomplish this is to knock out any items that you don’t need and keep only the things that are absolutely necessary. If you have any cabinets in your basement that are too large for what you have, you may want to consider removing them. Your new bathroom cabinet will be much smaller than your old one, so having extra space can be helpful.
To make sure that your basement bathroom is perfect for your new bathroom, you need to remember some things.
First off, you need to line the walls to make sure there is absolutely no space around them. This space will not only make your bathroom look smaller, but it can also cause you to have accidents near the corners. Be sure to measure where the walls will be and mark them accordingly on your bathroom cabinet plans.
Next, you need to begin building the floor of your basement bathroom. Make sure to use a level when doing the flooring.
Any mistakes here can cost you time and money later. After you have the floor finished, it is time to move on to the next step – the wall. This part may require an expert to come in and start from scratch. This is why it is good to consult a professional to make sure that your basement walling is done right.
How to install a basement bathroom plans is not as difficult as some people may think.
Sure, there are a lot of details to take care of. But, if you put in the time and effort to learn everything you need to know, it should be no trouble for you to finish this project. The time spent researching the proper steps to take will pay off for you in the long run. You will have a finished bathroom that not only looks great but also functions perfectly.
